Click To Call(727) 474-1551Click To Get A Free Estimate
Wet look sealed paver pool deck with a screen cage over a Clearwater backyard

A grippier, deeper colored deck around the pool

Pool Deck Paver Sealing in Clearwater, FL

Call (727) 474-1551 for a free pool deck paver sealing estimate in Clearwater.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(727) 474-1551
Pool decks

Can someone seal my Clearwater pool deck, and how soon will they reply?

Yes, a local contractor handles pool deck paver sealing around Clearwater, FL, and an answer comes back within 1 business day, often within a few hours. The estimate costs nothing and you are free to say no. Start with a call to (727) 474-1551.

A pool deck takes more abuse than any other paved spot at the house. Splash water, sunscreen, chlorine or salt, bare feet and a hot afternoon sun all land on the same few hundred square feet. Faded pavers and green seams at the water line are the usual reason owners call. Describe the pool, the finish you have now and how the deck is used, and ask for a free estimate.

Call (727) 474-1551

Wear

Why does a pool deck wear out sooner than the rest of my pavers?

What does a sealer coat protect a pool deck from?

Water is the whole story. Premier Coatings says a sealer coat slows the breakdown caused by UV light, chlorine and rainfall, and keeps oils and pool chemicals from soaking in. Without it, the deck takes all of that straight into the stone. To ask how your deck is holding up, call (727) 474-1551.

What does Clearwater air add to the wear?

Clearwater adds its own pressure. Rusty's Pro Wash & Seal says salt spray from the Gulf and Clearwater Harbor settles into joints, and it describes Clearwater as having some of the highest year-round humidity in Pinellas County. Damp stone grows algae, and algae is where a deck turns slick. Under-sealed coastal decks, it says, build up slippery film faster than inland ones. Mention how close you are to the water when you ask for a free estimate.

Chlorine and sunscreen

Both leave a film on stone that holds dirt and dulls the color between washes.

Salt in the air

Gulf and harbor spray dries into the joints and shows later as white haze.

Damp from shade

Screen cages and tree cover keep one corner wet long after the rest has dried.

Foot traffic

Wet feet wear the same path to the water every day, so that stretch fails first.

Paver deck edge meeting pool coping on a sunny Clearwater lanai

Which finish gives a Clearwater pool deck good grip?

Which finish looks richest?

Gloss looks wet and rich, and Rusty's Pro Wash & Seal lists high gloss as the most popular Clearwater pool deck finish. Unilock cautions that high gloss may be slippery when wet and treats matte as the safer choice. Premier Coatings sits between the two with satin, a soft sheen it calls popular on decks. Ask for a sample poured on a spare paver and wet it yourself when you ask for a free estimate.

How is grip kept on a glossy deck?

Where bare feet matter most, ask about traction. Premier Coatings says the product, its dilution and the application rate are adjusted around pools, and traction media is added when needed. A glossy deck can be made safe, but the contractor has to plan for it. Say who uses the pool, children and older relatives included, when you call (727) 474-1551.

How it works

What is the process for sealing a pool deck in Clearwater?

The process runs in the same order on almost every deck, and the order is what keeps the coat from failing. Premier Coatings lists seven steps, which this page folds into five. To book a walk-through, call (727) 474-1551.

1. Wash and treat

Dirt, algae, efflorescence and old residue come off first, and an algaecide follows to slow regrowth.

2. Rinse and protect

Cleaner is rinsed away, planters and screens are covered, and the edges are masked.

3. Fill the joints

Silica blend sand is swept in and compacted so the stones lock and water drains.

4. Check for moisture

The deck must be dry before the contractor goes on, or the sealer clouds.

5. Flood coat

A heavy coat of solvent-free sealer goes on, and the finish is checked for pooling.

6. Walk through

The contractor shows what to keep off and for how long before the pool is back in use.

How soon can my family use the pool after the deck is sealed?

What weather does the job need?

Plan around the weather. Unilock suggests 24 to 48 hours of clear skies before sealing, a surface between 50 and 90 degrees, and up to 48 hours of dry weather after, with sprinklers off. Wet pavers need a few hours of sun or about a day in shade to dry first. To fit the job to a forecast, call (727) 474-1551.

When can people walk on the deck again?

Foot traffic comes back sooner than most owners guess. Premier Coatings says light walking is fine after a few hours and that most pool decks take a single day. Rusty's Pro Wash & Seal asks for 24 hours before walking and 48 to 72 hours for a full cure. Ask which number the contractor works to when you ask for a free estimate.

Pricing

What does pool deck paver sealing cost in Clearwater?

How is the table built?

No page gives a rate for pool deck sealing alone, so the table below is built from the published pieces: the $1.25 to $2.50 Tampa Bay range for cleaning and sealing, and the 800 square foot pool deck figure of $1,000 to $2,000 from Rusty's Pro Wash & Seal. Size, stained or peeling sections and stone type move the number. For your own deck, ask for a free estimate.

Why do local figures differ?

The same company's Clearwater page lists $1.00 to $1.75 a square foot for most homes here and puts pool decks and natural stone above that. Treat the gap as a reason to ask each bidder what the price covers. Questions about stripping or joint sand? Call (727) 474-1551.

Deck sizeTypical exampleWash, sand and seal
400 sq ftPlunge pool or spa surround$500 to $1,000
800 sq ftPool deck with a lanai$1,000 to $2,000
1,200 sq ftPool, lanai and outdoor kitchen$1,500 to $3,000
1,600 sq ftWrap around deck and walkway$2,000 to $4,000

Math uses the $1.25 to $2.50 per square foot Tampa Bay range. Rusty's Pro Wash & Seal prices an 800 square foot pool deck at $1,000 to $2,000, and its Clearwater page says pool decks sit at the higher end of its $1.00 to $1.75 local figure because of extra prep. Minimum charges of $500 to $1,000 can lift the smallest jobs.

Get a Free Estimate

Does a saltwater pool or a screen enclosure change the plan for my Clearwater deck?

Does a salt system shorten the reseal gap?

Rusty's Pro Wash & Seal says saltwater pools speed up efflorescence and can shorten sealer life, so a salt system may call for a shorter reseal gap. A screen cage blocks some sun and rain, which helps the surface last, but it also holds damp air close to the stone. Tell the contractor which setup you have when you ask for a free estimate.

How does Pinellas air affect a pool deck?

Limestone sits under most of Pinellas County, according to Wikipedia, and the county is bounded by the Gulf and Tampa Bay. Moist air arrives from both sides, which is why decks here are rarely truly dry for long. Ask how the contractor checks moisture before the coat goes on. To talk it over, call (727) 474-1551.

Should a travertine or natural stone deck be handled differently?

Yes. Natural stone takes a penetrating sealer in Clearwater, and Rusty's Pro Wash & Seal says that protects the stone without changing its texture or its grip. Concrete and clay pavers can take a film forming coat. If your deck is stone, read the travertine sealing page or call (727) 474-1551.

Which time of year suits sealing a Clearwater pool deck?

Is winter a good season for the job?

Rusty's Pro Wash & Seal says spring, fall and winter are often ideal and that sealing is possible year-round. Wikipedia says most Pinellas rain falls from June through September, so a dry stretch in cooler months is easier to find. To pick a month, call (727) 474-1551.

What does a summer rainstorm do to the plan?

An afternoon cloudburst can wreck a fresh coat, and Unilock warns that pavers above 90 degrees can keep sealer from working. A contractor who checks the forecast and starts early protects the finish. Ask how rain days are handled when you ask for a free estimate.

Photos

How do sealed pool decks look around Clearwater?

Freshly sealed paver driveway beside a Clearwater screened pool
Sealed paver pool deck beside a Clearwater screened pool
Sealed paver patio behind the home beside a Clearwater screened pool
Sealed paver walkway to a front door beside a Clearwater screened pool
Close view of freshly sealed pavers beside a Clearwater screened pool
Paver area with one cleaned half beside a dirty half beside a Clearwater screened pool
Contractor cleaning pavers beside a Clearwater screened pool
Contractor sealing or sanding pavers beside a Clearwater screened pool
Questions

What do Clearwater homeowners ask about sealing a pool deck?

How much does it cost to seal pavers per square foot?

Rusty's Pro Wash & Seal says most Tampa Bay cleaning and sealing jobs run $1.25 to $2.50 per square foot. For a pool deck the same company gives about $1,000 to $2,000 for 800 square feet. Natural stone and extra prep push a deck toward the upper end.

Is it better to spray or roll paver sealer?

Many crews do both. Unilock, a paver maker, suggests wetting the surface with a sprayer and then pulling the excess off with a dry roller so no streaks dry in. On a pool deck that matters, because a thick patch can turn slick.

How often should I seal pavers in Florida?

Premier Coatings, a Pinellas County company, says Florida pool decks benefit from cleaning and resealing every 2 to 3 years. Rusty's Pro Wash & Seal says 3 to 5 years across Tampa Bay, shorter beside saltwater pools. Water that soaks in instead of beading is the sign to watch.

How much does it cost to get pavers sealed?

A job is priced by the square foot after the contractor sees the surface. Tampa Bay companies publish $1.25 to $2.50, and a small spa deck may land on a minimum charge instead. Stripping old coating or resetting loose stones is quoted in addition. To get a number for your deck, ask for a free estimate.

Does a saltwater pool change how a Clearwater deck should be sealed?

It can shorten the time between coats. Rusty's Pro Wash & Seal says saltwater pools speed up efflorescence, the white bloom that dulls color, and shorten sealer life. Tell the contractor which kind of pool you have so the plan allows for it.

Which finish is safest around a Clearwater pool?

Unilock warns that high gloss sealers may be slipperier when wet and points to matte as the calmer option. Premier Coatings says satin is a popular pick on pool decks and that traction media can be added. Ask to see the sample dry and wet.

How soon can the deck be used after sealing?

Premier Coatings allows light foot traffic after a few hours, while Rusty's Pro Wash & Seal asks for a full 24 hours before walking and 48 to 72 hours for a full cure. Plan for no splashing and no furniture until the contractor clears it.

Does pool water or sunscreen hurt the sealer?

Premier Coatings says a sealer coat slows breakdown from UV light, chlorine and rain, and keeps oils and pool chemicals from soaking in. Oils still build up on the surface over time, which is one reason decks get a periodic wash.

Is a travertine pool deck sealed the same way?

No. Rusty's Pro Wash & Seal uses a penetrating sealer on travertine so the stone keeps its texture and grip. The travertine sealing guide covers that stone.

Which places near Clearwater can get a free pool deck estimate?

Pool deck estimates are open to Clearwater and every town below, from the barrier island side of Pinellas County to Pasco and Hillsborough. Pick the page nearest you for local notes, or call (727) 474-1551 if your street is not listed.

Ready for a pool deck that looks and feels right again?

Tell a local contractor about the deck and the pool. A reply arrives within 1 business day, often sooner, and the visit is free.

Call (727) 474-1551

Free, no obligation