Click To Call(727) 474-1551Click To Get A Free Estimate
Old paver driveway with a faded stripe where a coat of sealer has worn through near Clearwater

Faded, peeling or sunken pavers made right again

Paver Restoration and Resealing in Clearwater, FL

Call (727) 474-1551 to ask a local contractor whether your tired pavers can be brought back.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.25 to $2.50 a sq ft to clean, sand and seal
Call Now(727) 474-1551

Who restores worn pavers around Clearwater, and when will they answer?

A local contractor restores and reseals pavers across Clearwater, FL, and you get a reply within 1 business day, often much sooner. Share a few photos or a street name, and say what bothers you most, whether that is peeling sealer, faded color or joints with no sand. The estimate costs nothing. To begin, call (727) 474-1551.

Restoration is the job for pavers that are past a simple wash. It can mean stripping a coat that has gone cloudy, refilling empty joints, resetting a few stones and sealing again so the color is even. Not every surface needs all of it, and a contractor sorts that out on the visit. Mention how old the pavers are when you ask for a free estimate.

Call (727) 474-1551

How do I know my pavers need restoring and not only a wash?

A wash fixes dirt and algae. Restoration is for what a wash cannot touch. Look for three signs: a coat that flakes, whitens or turns patchy, joints so low that stones rock under a foot, and color that stays dull after a hose rinse. Paver Rescue says that once joint sand is gone, pavers shift on their own, which leads to rocking stones, wider joints, weeds and ants. If you see any of that, call (727) 474-1551.

Which Clearwater area places can book paver restoration?

Restoration work is offered across the county seat and the places around it, from the Pinellas peninsula to the Pasco and Hillsborough sides. Pick yours below, or ask for a free estimate if it is not named.

Two contractors lifting and relaying a sunken paver by a Clearwater garage apron

What goes wrong with pavers in Clearwater over the years?

Wikipedia puts Clearwater at about 52.6 inches of rain a year over roughly 104 days, with daily thundershowers from June through September and about 2,985 hours of sun. That mix washes sand out and bakes coatings. Paver Rescue adds causes underneath: a low spot from a downspout, a settled trench over a utility line, tree roots and poor compaction at install. Bay Area Paver Savers names cracked, sunken, loose and uneven stones as the usual complaints. Tell the contractor where water collects when you ask for a free estimate.

How it works

What does the paver restoration process involve?

Paver Rescue lays out a seven step order that most restorers follow in some form, and the sequence is the point. Fixing the base after sealing would undo the work. To book the first step, call (727) 474-1551.

1. Walk-through

A look at the surface, a tape for square footage and notes on stones that have sunk, cracked or rocked.

2. Base repairs

Affected pavers are lifted, the bedding is corrected and re-compacted, and stones go back level.

3. Strip and wash

Failed sealer, algae and dirt come off. Rusty's says its restoration prep removes failed or old sealer.

4. Dry time

Pavers must be fully dry before sand goes in, so the schedule follows the weather.

5. Joint sand

Fresh sand is swept in until joints are full to the chamfer, the small bevel at the paver edge.

6. Sealer

Paver Rescue says a minimum of two coats of water-based sealer goes on, after any tint.

7. Final look

A last walk-through, then instructions for how long to stay off.

Where on a Clearwater lot does restoration pay off first?

Start with the spot people see and use. A driveway apron takes tires, sun and oil, and a pool deck takes splash, sunscreen and bare feet. Rusty's Pro Wash & Seal says pool decks and heavily faded or stained surfaces land at the high end of its tinting range because they need more prep. Entry walks are small but sit at eye level for every guest. If the budget is tight, ask the contractor to price the areas one by one, then call (727) 474-1551.

Poolside areas also deserve a closer watch. Bay Area Paver Savers says poolside surfaces may need more frequent cleaning or light maintenance, and Paver Rescue points to pool drains as a place where joints lose sand. A short list of your trouble spots, in order, helps the contractor plan the visit. Make that list when you ask for a free estimate.

Will restoring pavers stop weeds and ants in the joints?

It can slow them. Paver Rescue says empty joints let pavers shift, and that leads to weeds and ant colonies. Full joints with a sealer that locks the sand in leave less room for either, and the sealer it describes includes a mold and algae inhibitor and discourages weed growth without harming nearby landscaping. Roots and runoff can still return, so the fix lasts longest when the cause, such as a downspout dumping onto the stones, is dealt with too. Ask about drainage when you ask for a free estimate.

Should I tint faded pavers or leave the color alone?

Rusty's Pro Wash & Seal offers tint in 12 colors, from Double Tan and Brick Red to Slate Black and White Wash, and says tint penetrates the paver instead of sitting on top like paint. It pairs tint with one of four finishes: natural, mid-gloss, gloss and high-gloss. Tint matters most on pavers whose color has washed out or where patches have been replaced and no longer match. Ask to see a sample on your own stone when you ask for a free estimate.

Weathered pool deck pavers with a patched section before a fresh coat in Clearwater
Pricing

What does paver restoration cost in Clearwater?

The published numbers climb with the amount of work. Rusty's Pro Wash & Seal lists $1.25 to $2.50 a square foot to clean and seal, $1.75 to $3.00 to tint and seal in Clearwater, and $3,000 to $8,000 and up for a major restoration. It says heavy mold, rust, oil and failing old sealer add cost, and that a straightforward job on a well-drained surface sits at the lower end. Use the table to see which tier fits, then ask for a free estimate.

Pavers that only need a wash can start with the paver cleaning page, and the paver sealing page covers a plain new coat.

Level of workPublished figureWhere it comes from
Clean, re-sand and seal pavers in fair shape$1.25 to $2.50 per sq ftRusty's Pro Wash & Seal, Tampa Bay guide
Strip old coating, wash, refill joints, tint and seal$1.75 to $3.00 per sq ftRusty's Pro Wash & Seal, Clearwater tinting page
Pavers that need a lot of lifting and resetting$3,000 to $8,000 and up for a major restorationRusty's Tampa Bay guide
Removing and replacing large sections$5,000 to $15,000 and upRusty's Tampa Bay guide
A very small areaMinimum charge of $500 to $1,000Rusty's Tampa Bay guide

No page this site read prices stripping alone, so the strip, wash and reseal row comes from a company's published tint and seal range, which includes removing failed sealer. Your own price depends on what the contractor finds at the walk-through.

Get a Free Estimate

How long does a restoration take?

Bay Area Paver Savers says most repair projects finish within a few days once work begins, depending on size, access and weather. Paver Rescue says cure time depends on humidity and temperature, so a damp week stretches it. The scheduling driver is dry stone: no sand and no sealer until the pavers are fully dry. Ask for the plan in writing, including when you can use the driveway, when you ask for a free estimate.

Does resealing hold the joint sand in place?

For a few years, yes. Paver Rescue says sealed joints typically hold their sand for several years, while unsealed joints can lose noticeable sand in a single rainy season, mostly on slopes and around pool drains. Sealing is not a fix for a bad base, though, and Bay Area Paver Savers recommends a check at least once a year for settling and drainage, with poolside areas looked at more often. Ask how that check would work by calling (727) 474-1551.

Homeowner and contractor comparing a stripped test square with a faded driveway edge
Photos

What do restored pavers look like around Clearwater homes?

Freshly sealed paver driveway from a restoration around Clearwater
Sealed paver pool deck from a restoration around Clearwater
Sealed paver patio behind the home from a restoration around Clearwater
Sealed paver walkway to a front door from a restoration around Clearwater
Close view of freshly sealed pavers from a restoration around Clearwater
Paver area with one cleaned half beside a dirty half from a restoration around Clearwater
Contractor cleaning pavers from a restoration around Clearwater
Contractor sealing or sanding pavers from a restoration around Clearwater

When is replacing pavers smarter than restoring them?

Restoration has limits. When stones are cracked or spalled through, a repair crew swaps them for matching units where available, per Paver Rescue. When waviness runs across the whole field, that points to a base problem larger than a few stones, and the work moves into the $5,000 to $15,000 and up tier Rusty's lists for removal and replacement. A contractor should say so at the estimate and show where. Start the conversation by calling (727) 474-1551.

Questions

Frequently Asked Questions

Can old pavers be restored?

Often, yes. Pavers that have faded, grown algae or lost joint sand can usually be washed, refilled and sealed, and Rusty's Pro Wash & Seal also tints faded stone. Pavers that have sunk or cracked need base repair first, which Paver Rescue says is where repair begins.

How much does it cost to restore pavers?

It depends on how far the damage goes. Rusty's Pro Wash & Seal publishes $1.25 to $2.50 a square foot for cleaning and sealing, $1.75 to $3.00 for tinting and sealing in Clearwater, and $3,000 to $8,000 and up for a major restoration. A small job can hit a $500 to $1,000 minimum.

What is the average cost to seal pavers in Florida?

Rusty's Pro Wash & Seal says Tampa Bay jobs usually run $1.25 to $2.50 a square foot to clean and seal. Pool decks and natural stone tend to land higher, and stripping an old coat adds to the total.

Is there a downside to sealing pavers?

Yes. Sealing is a cost that comes back, a gloss can feel slick when wet, and sealer put over dirt or dampness can trap what is under it. Paver Rescue notes that sealer applied before an afternoon storm can haze, so the weather matters.

How often should I seal pavers in Florida?

Rusty's Pro Wash & Seal gives 3 to 5 years for Tampa Bay, shorter in full sun and near salt water. Paver Rescue says sealed joints hold sand for several years, while unsealed joints can lose noticeable sand in a single rainy season.

Can I seal my pavers myself?

Hardware stores sell sealer, but the weak point is preparation. Paver Rescue says pavers must be fully dry before sanding, and that sealer put down ahead of an afternoon storm can haze. A contractor also has to deal with old coating, which raises the quote when it is failing.

Why do my Clearwater pavers keep losing joint sand?

Paver Rescue lists rain runoff, washing and humidity as the causes, and Wikipedia counts about 52.6 inches of rain over roughly 104 days a year here. Once the sand is gone, stones shift, joints widen and weeds follow.

What happens if pavers are sealed over old failing sealer?

The new coat sits on a weak layer and can fail with it. Paver Rescue says failing old sealer has to be dealt with and raises the quote, and Rusty's Pro Wash & Seal removes failed or earlier sealer in its restoration prep before anything new goes on.

Can faded brick pavers be tinted?

Yes. Rusty's Pro Wash & Seal says tinting restores the reddish-brown tone of brick pavers, and it offers 12 colors. The tint soaks into the paver instead of sitting on top like paint, so it should not peel.

Do sunken pavers need to be fixed before they are resealed?

Yes. Bay Area Paver Savers lists base preparation, alignment, joint stabilization and drainage as the parts of a lasting repair, and sealer cannot lift a sunken stone. The reset comes first, then the wash, sand and sealer.

Want your Clearwater pavers to stop looking tired?

Describe the peeling, fading or sunken spots, and a local contractor writes back within 1 business day, often within hours. Looking is free.

Call (727) 474-1551

Free, no obligation